Description

These are for the Mbox / MAKPAC type 1.

 

I have started with printing a flat bottom plate for the Makita Mbox / MAKPAC to work from.

You can find the bottom on my account:


https://makerworld.com/en/models/2123779-makita-mbox-makpac-flat-bottom-plate#profileId-2299187

 


This package consists of:

- Full size organizer inserts (Place for 8 pieces in an Mbox)
- Double length inserts (Place for 4 pieces in an Mbox)
- Half size organizer inserts (Place for 16 pieces in an Mbox)
- Double size inserts (Place for 4 pieces in an Mbox)
- 2 Infill pieces for the sides (printed in black on the pictures).
- 2 Infill pieces for the front (printed in black on the pictures).
- 2 Infill pieces for the back (printed in black on the pictures).
- Half size organizer insert with bit holder (Place for 16 pieces in an Mbox)


The height of the inserts is 72 mm.


Fill your Mbox / MAKPAC with the combination you would like to have.


It is printed with my Bambu Lab P1S with Bambu Lab PETG HF with a 0,4 mm hotend on a Bambu Textured PEI Plate.
It is printed with the settings “0.20mm Standard @BBL X1C” and it fits perfect with these settings.


Use thin double sided tape to fix the parts if you think it's necessary. I didn't use any.


https://makerworld.com/en/models/2509673-makita-mbox-makpac-type-1-organizer-inserts?from=search#profileId-2759785